Results 1 to 8 of 8

Thread: Hi

  1. #1
    Join Date
    Mar 2002
    Location
    North Jersey
    Posts
    915

    Hi

    1
    Attached Images Attached Images  

  2. #2
    Join Date
    Mar 2002
    Location
    North Jersey
    Posts
    915

    2

    2
    Attached Images Attached Images  

  3. #3
    Join Date
    Mar 2002
    Location
    North Jersey
    Posts
    915

    3

    3
    Attached Images Attached Images  

  4. #4
    Join Date
    Mar 2002
    Location
    North Jersey
    Posts
    915

    4

    4
    Attached Images Attached Images  

  5. #5
    Join Date
    Mar 2002
    Location
    North Jersey
    Posts
    915

    Unfinished buisiness

    5
    Attached Images Attached Images  

  6. #6
    Join Date
    Mar 2002
    Location
    North Jersey
    Posts
    915

    Futasuji-hi(cont.)

    Getting more refined,i start with a very narrow tool(a .093 carbide drill shank press fit to a handle and angled slightly at the cutting face and used to scrape out material)
    Attached Images Attached Images  

  7. #7
    Join Date
    Mar 2002
    Location
    North Jersey
    Posts
    915

    file to help straiten groove

    Piece of a diamond file
    Attached Images Attached Images  
    Last edited by Greg.D; 11-16-2004 at 03:58 PM.

  8. #8
    Join Date
    Mar 2002
    Location
    North Jersey
    Posts
    915

    the end

    Once you have the long groove started and straitened(using the narrow tool) it is easier to go to the next tool ,.125'' and make it wider and deeper.When getting near the end of the end of the groove you have to take shorter,sketchier strokes.A little harder to controle
    Attached Images Attached Images  

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •